How to fold up a folding picnic table

Learn how to fold up a folding picnic table step by step, unlock and fold the legs, latch the tabletop, and carry and store a Lifetime or plastic picnic table safely.

8 min read1 views
— · 0 votes
Contents
  1. Clear and check the table first
  2. Unlock the tabletop and legs
  3. Fold the legs and benches inward
  4. Close the tabletop halves
  5. Latch the table and use the carry handle
  6. Move and store the folded table
  7. Folding steps at a glance
  8. Keep the folding parts working
  9. Folding picnic table questions
  10. How do you fold up a Lifetime picnic table?
  11. How do you fold up a plastic picnic table?
  12. Where is the release on a folding picnic table?
  13. Why will my folding table not fold flat?
  14. Can one person fold and carry a picnic table alone?
  15. How should a folded picnic table be stored?

Folding up a picnic table means releasing the tabletop latch, folding the bench and leg frames inward, then folding the table halves together and locking the carry handle. The exact steps depend on the model, so check the sticker or manual that came with your Lifetime folding table instructions. Work slowly and keep hands clear of the hinges while the table moves.

  • Clear the tabletop and benches of food, cups and loose gear before you start folding.
  • Find the table top latch or release lever and unlock the folding legs before you push anything.
  • Fold the benches and legs inward first, then bring the tabletop halves together.
  • Lock the carry handle or latch so the folded table stays closed while you lift it.
  • Store the folded table upright or flat in a dry place, not leaning loose against a wall.

Clear and check the table first

Folding a picnic table goes more smoothly when the surface is empty and the ground around it is clear. Remove cups, plates and picnic gear from the tabletop and both benches. Wipe off crumbs or spills so grit does not get trapped in the hinges.

Check that the table sits level and that nobody is standing on the benches. Ask children and other helpers to step back before you handle the folding parts. A folding picnic table can pinch fingers where the frame meets the tabletop.

Look for the manufacturer sticker under the tabletop or on the leg frame. That sticker shows the folding steps for your model and the location of the release. A Lifetime picnic table and a generic plastic picnic table can have different latches, so follow the label on your own table.

Unlock the tabletop and legs

Unlocking the legs is the first real step in folding a picnic table, and the release sits in a different place on each model. Find the table top latch, a spring pin, or a lever under the tabletop or at the leg joint. Squeeze, pull or flip the release until the leg frame moves freely.

Some plastic picnic tables use a sliding lock bar that runs along the underside. Push or pull that bar toward the open position and hold it while you start the fold. Other models use a pin that you pull out and turn to keep it released.

Never force a leg that feels stuck, because bending the frame can damage the locking mechanism. If the release will not move, check for a second latch on the other side or a pin you missed. A table that still resists may need a light oil on the hinge or a call to the maker for the folding instructions.

Fold the legs and benches inward

Bench folding comes next, and the benches on a folding picnic table swing toward the center as the leg frame collapses. Stand at one end and fold one bench frame inward toward the tabletop. Keep your fingers on the outside of the frame, away from the pivot points.

Move to the other end and repeat the same bench folding motion. The folding legs should tuck flat against the underside of the tabletop. If your table has separate leg braces, fold those in the same direction before you close the halves.

Watch that the legs do not catch on the ground or on a bench as they swing. Lift the table end slightly if a leg drags on pavement or grass. Both ends should end up folded evenly, with no frame sticking out to the side.

Close the tabletop halves

The tabletop fold brings the two halves of the surface together into one compact package. With every leg and bench frame folded inward, lift one end of the table and tip it toward the other. Let the halves meet along the center hinge and settle into place.

Guide the halves with both hands rather than letting them drop. A plastic picnic table top can crack if it slams shut on a hard surface. Keep the folded frames inside the tabletop as the halves close.

Check that the edges line up and that no bench frame is pinched between the halves. If a frame sticks out, open the table a little and refold that section. The folded table should look like a flat case with the legs tucked inside.

Latch the table and use the carry handle

Locking the folded table keeps the halves together while you lift and carry it. Find the table top latch or the carry handle on the outside of the folded table. Snap or slide the latch until it holds the two halves tight.

The carry handle is designed for one person to lift the folded table at its balance point. Grip the handle with one hand and lift with your legs, keeping the table close to your body. Ask a second person to help if the table feels heavy or awkward.

Test the latch by giving the folded table a gentle shake before you walk. A loose latch can let the table open on your foot or on the ground. Carry the folded table by the handle only, not by the leg frames.

Move and store the folded table

Storage and carrying go together once the table is folded and latched. Carry the table to a car, shed or garage with the handle up and the folded surface facing your leg. Set it down flat rather than dropping it on a corner.

Store a folded picnic table in a dry place, upright against a wall or flat on a shelf. Damp storage can rust steel frames and warp some plastic tabletops over time. Keep the table out of direct sun for long periods if the plastic is light colored.

Before the next park day, unfold the table in reverse order and check that every latch clicks into place. A folded table that was stored with a bent frame may not lock correctly. Report a damaged latch to the maker rather than using the table in a wobbly state.

Folding steps at a glance

These folding steps apply to many folding picnic tables, including the Lifetime style with a center hinge and a carry handle. The order matters because the legs must be inside before the tabletop closes. Work through the list once, then repeat it the same way each time.

Each step should end with the table stable and your hands clear. Stop at any point where a part will not move and look for another release. Forcing a step is the main way frames and latches get bent.

Write the step order on a card and keep it with the table if helpers use it too. A consistent order makes takedown at a park faster and protects the folding parts. The card also reminds everyone to latch the table before carrying it.

  • Clear the tabletop and benches of all gear.
  • Find and release the tabletop latch or leg lock.
  • Fold one bench frame inward toward the tabletop.
  • Fold the second bench frame the same way.
  • Tip the tabletop halves together along the center hinge.
  • Latch the folded table and grip the carry handle.

Keep the folding parts working

Folding legs and latches last longer when grit and moisture stay out of the joints. Wipe the hinges and lock pins after a dusty park day. A dry cloth is enough for plastic parts, and a light machine oil helps a stiff steel hinge.

Check the latch and carry handle before each trip. Loose screws at the handle or a bent pin can be tightened or replaced. Parts for a Lifetime folding table are available from the manufacturer, not from a general hardware bin.

Store the table folded and latched so the frame does not rest on a single leg. Avoid stacking heavy items on the folded tabletop. Damage to the tabletop fold line is hard to repair and can stop the halves from meeting squarely.

Folding picnic table questions

How do you fold up a Lifetime picnic table?

A Lifetime picnic table folds by releasing the tabletop latch, folding both bench and leg frames inward, and tipping the tabletop halves together. The carry handle then locks the folded table for lifting. Follow the sticker on your model, because the latch position differs between Lifetime tables.

How do you fold up a plastic picnic table?

A plastic picnic table folds the same way in most cases, with a lock bar or pin under the tabletop that frees the legs. Fold the benches in first, then close the tabletop halves and latch them. Check for a second release on the opposite side if the legs will not move.

Where is the release on a folding picnic table?

The release on a folding picnic table sits under the tabletop or at the leg joint, and it may be a latch, a spring pin or a sliding bar. Look along the underside near the center hinge and at each end. The manufacturer sticker usually points to it.

Why will my folding table not fold flat?

A folding table will not fold flat when a latch is still engaged, a pin is stuck, or a bench frame is caught on the ground. Check both ends for a second lock before forcing anything. A bent frame or a damaged hinge needs a replacement part from the maker.

Can one person fold and carry a picnic table alone?

One person can fold and carry a folding picnic table when the frame moves freely and the carry handle is balanced. Fold the benches and legs before lifting, then grip the handle and lift with your legs. Ask for help if the table is heavy or the path is uneven.

How should a folded picnic table be stored?

A folded picnic table should be stored latched, in a dry place, upright against a wall or flat on a shelf. Dry storage protects steel frames from rust and keeps plastic tabletops from warping. Avoid stacking heavy gear on the folded tabletop.

Latest articles