Cloud type identification: names and list of cloud types

Learn how to identify cloud types by their shape and height, with the names of the main cloud families and what each one tells you about the sky.

9 min read2 views
— · 0 votes
Contents
  1. How to start identifying clouds
  2. The three basic shapes: cirrus, cumulus, stratus
  3. Nimbus and the rainy cloud names
  4. Middle clouds and the alto prefix
  5. High clouds: cirrus, cirrostratus, cirrocumulus
  6. Low clouds and stratocumulus layers
  7. Reading cloud families together
  8. Practice naming clouds on an outing
  9. Questions about cloud names and identification
  10. How do you identify cloud types?
  11. What is the list of cloud types I should know?
  12. What does it mean when I have to name cloud types by height?
  13. What does the word nimbus mean in a cloud name?
  14. Can one sky show more than one cloud type?

Cloud type identification starts with two questions: how high the cloud sits and what shape it takes. The main cloud types are cirrus, cumulus, stratus and nimbus, and their names combine with height prefixes to form the full list of cloud types. Learning to name cloud types turns an ordinary look upward into a reading of the sky.

  • Height comes first: low, middle and high cloud families each have their own names.
  • Shape comes second: wispy, heaped, layered or rainy describes what you see.
  • The prefix 'alto' marks a middle cloud and 'cirro' marks a high one.
  • A cloud named with 'nimbus' is one that produces steady precipitation.
  • Cloud families work together, so several names can describe one sky.

How to start identifying clouds

Cloud type identification begins with an estimate of height in the sky and an observation of shape. High clouds sit as a thin veil, middle clouds form a mid-level sheet, and low clouds hover closer to the ground. Tell these apart before you worry about the finer names.

Shape follows height and splits the sky into three picture groups. Wispy, feathery forms suggest a cloud family mainly made of ice crystals. Heaped, cotton-like forms grow upward from a flat base and belong to the cumulus type. Layered, flat sheets belong to the stratus type.

Sky observation works better when you study the edges of a cloud, not just its middle. A sharp edge that grows during the morning points to rising air and a building cumulus cloud. A soft, blurred edge spread across the sky points to a stratus or altostratus sheet that may thicken later.

  • Stand where a broad part of sky is visible and look up for a full minute.
  • Judge height by whether cloud detail is fine and distant or large and closer.
  • Note whether the cloud is wispy, heaped or layered.
  • Check the edges and the base, which reveal what the cloud is doing.
  • Watch for a name change across the sky, because layers of cloud can stack.

The three basic shapes: cirrus, cumulus, stratus

Cirrus is the high, wispy cloud that looks like white hair or a feather drawn across the sky. Cirrus clouds are thin enough to let sunshine through and often appear ahead of a change in the weather. The cirrus name is the root for the high-cloud family and belongs on any list of cloud types.

Cumulus is the heaped cloud with a flat base and a rounded or bubbling top. Fair-weather cumulus floats in a clear blue sky and grows where warm air rises. A cumulus cloud that builds tall and dark develops into cumulonimbus, the deep storm cloud of the cumulus family.

Stratus is a featureless gray sheet that covers the sky like a blanket. Stratus cloud can sit low enough to hide the tops of hills and can turn into fog when it touches the ground. A stratus layer that thickens and lowers often produces drizzle rather than a heavy shower.

Nimbus and the rainy cloud names

Nimbus is the cloud name segment that marks precipitation, and it attaches to the front or back of another name. Nimbostratus is a thick, dark, layered cloud that fills the sky and delivers steady rain or snow. The nimbostratus name tells you the cloud has both a layer shape and a rainy duty.

Cumulonimbus combines a heaped cumulus build with the nimbus rain label and reaches great height. This cloud shows an anvil top where the top of the column spreads out and a dark base beneath. Cumulonimbus belongs to the low cloud family at its base but towers upward into the middle and high levels.

The older single word nimbus is rarely used alone today, because the names of raining clouds combine it with a shape. A cloud list therefore shows nimbostratus and cumulonimbus as separate entries rather than one simple nimbus type. Hearing the nimbus segment in a name should make you think about rain or snow.

Middle clouds and the alto prefix

Altocumulus and altostratus make up the middle cloud family, and the alto prefix marks that middle position. Altocumulus appears as a group of small rounded patches or rolls spread across the sky. The patches can be separated or packed together, and their shaded undersides help you tell them from high cirrocumulus.

Altostratus is a fine gray or blue-gray sheet that covers the sky and dims the sun to a bright patch. Middle clouds of the altostratus type look thicker than their high cousins and more even than altocumulus. A sheet that steadily thickens and lowers may become nimbostratus and start producing steady precipitation.

The middle level sits between the high, icy clouds and the low, layered clouds, so both shapes appear there. Altocumulus keeps the heaped look of the cumulus family while altostratus keeps the flat look of the stratus family. That split is why the cloud list carries paired names at each height.

Cloud nameHeight familyLook in the sky
CirrusHighWispy white strands
CirrostratusHighThin sheet with a halo
CirrocumulusHighSmall ripples or grain
AltocumulusMiddleRounded patches or rolls
AltostratusMiddleEven gray sheet
StratusLowFlat featureless layer
StratocumulusLowLumpy gray sheet
NimbostratusLowThick dark rain sheet
CumulusLowHeaped cotton with flat base
CumulonimbusLow base, tall topTowering storm cloud with anvil

High clouds: cirrus, cirrostratus, cirrocumulus

High clouds form in the cold upper air and carry the cirro prefix when they are layered or rippled. Cirrostratus is a veil so thin that the sun or moon shows through it with a ring of light, called a halo. The halo comes from ice crystals in the veil bending light, which is a reliable sign of this high cloud.

Cirrocumulus is a rippled high cloud that looks like fine grains or small scales rather than big puffs. The grains are tiny because the cloud is far away and made mostly of ice crystals. A sky full of cirrocumulus carries a textured pattern that differs clearly from the softer cirrus strands.

High clouds of the cirrus family often arrive first when a weather system approaches. A single cirrus strand may also streak the sky in fair weather without any change to follow. Watching how fast a high layer thickens is a fair way to judge the sky's direction.

  • Cirrus: separate white streaks that do not darken the sun.
  • Cirrostratus: a smooth veil that can show a halo around the sun or moon.
  • Cirrocumulus: fine grains or ripples packed in a sheet.

Low clouds and stratocumulus layers

Stratocumulus is the low cloud that covers the sky in a lumpy gray sheet with breaks of blue between the lumps. Stratocumulus looks like a stack of soft rolls or a patchwork rather than a smooth veil. The cloud keeps its layered shape from the stratus family and its heaped texture from the cumulus family.

Low clouds include stratus, stratocumulus, cumulus and the base of cumulonimbus, and they all sit at a level you can judge well. A stratus layer that touches the ground becomes fog, which limits how far you can see. That low, flat cloud can stay for a long while when the air near the ground is cool and still.

Low cloud shapes change quickly because they respond to heating from the ground. Morning stratocumulus may break into separate cumulus puffs as the surface warms. Watching that shift helps you name low clouds with more confidence than a single glance allows.

Reading cloud families together

Cloud families rarely appear alone, and a sky can hold a high veil, a middle sheet and low puffs at once. Named layers of cloud stacked in this way describe a sky in transition. Naming each layer separately gives a fuller picture than one label for the whole sky.

A rising sequence often starts with cirrus, then cirrostratus, then altostratus, and finally nimbostratus with steady rain. Seeing the cloud list work in that order is one of the practical rewards of sky observation. The sequence moves from high, thin cloud to low, thick cloud as the air becomes moister.

Cumulus families build instead of spreading, and they follow heating through the day. Cumulus puffs can grow into cumulonimbus when the air is warm and unstable. A dark base, a tall column and an anvil top together mark that change from a fair cloud to a storm cloud.

Practice naming clouds on an outing

A park outing gives you a wide sky and time to test your cloud type identification. Bring the cloud list in your head and name only what you can see clearly. Write or sketch each cloud type you spot so the names stick to the pictures.

Start with the broad shape and then add the height family, which is easier than naming a cloud at a glance. Say the name in full, such as altocumulus, so the prefix and the root become familiar. Repeat the trick for each layer, and the cloud list becomes a set of pictures rather than words.

Compare notes with a friend on the same sky to check your reading of height and shape. A second pair of eyes helps catch a layer you missed and keeps the naming honest. The skill grows with short, easy sessions outdoors rather than long study indoors.

Questions about cloud names and identification

How do you identify cloud types?

You identify cloud types by judging height first and shape second. High, middle and low cloud families each carry their own names, and the shape tells you whether a cloud is wispy, heaped or layered. Check the edges and base to confirm what the cloud is doing.

What is the list of cloud types I should know?

The main cloud types list runs from cirrus, cirrostratus and cirrocumulus at high level. Middle clouds are altocumulus and altostratus, and low clouds are stratus, stratocumulus, cumulus, nimbostratus and cumulonimbus. Each name combines a height prefix with a shape word.

What does it mean when I have to name cloud types by height?

Height matters because the same shape gets a different name at a different level. A layer at high level is cirrostratus, while a similar layer at middle level is altostratus. Naming a cloud by height puts it in the right cloud family and avoids confusion with its cousins.

What does the word nimbus mean in a cloud name?

Nimbus in a cloud name means the cloud produces precipitation. Nimbostratus delivers steady rain or snow from a thick layer, and cumulonimbus brings a towering storm cloud with rain and possibly hail. The nimbus segment is a warning to plan for wet weather.

Can one sky show more than one cloud type?

Yes, a single sky can hold high, middle and low cloud types at the same time. Layers stack as a weather system approaches, with thin high cloud arriving before thicker low cloud. Naming each layer separately describes the sky better than a single label.

Read next

Latest articles