# Outdoor gear size guide and size chart

Learn how an outdoor gear size guide and size chart work, how to take body measurements, read a measurement table, and confirm fit before you buy.

An outdoor gear size guide and size chart turn your body measurements into the size a maker expects you to wear. You take a few measurements with a soft tape, then compare them against the measurement table for that item. The chart describes a body, not a garment, so your own numbers matter more than the label you wear in everyday clothes. 

- Measure your chest, waist, hips and inseam with a soft tape and write the numbers down.
- Compare your measurements to the size chart of the specific item, because sizing differs between makers and between garments.
- Choose the size that matches your larger measurement when you fall between two sizes.
- A medium size is a label, not a fixed set of dimensions, so check the medium size specs on each chart.
- Layer bulk into your choice when you plan to wear the gear over other clothing.
 

## Why outdoor gear sizing needs its own guide 

Outdoor gear sizing follows the body rather than fashion, so a size chart for a rain shell works differently from a chart for jeans. Makers build patterns around body measurements and then add room for movement and layers. 

The same label can describe different dimensions from one brand to the next. A medium in one jacket may match a small in another, and a climbing harness uses waist and thigh measurements instead of a letter alone. 

Treat every size chart as belonging to that one item. Reading the chart before you order saves a return and keeps your park day comfortable. 

## How to take your body measurements 

Body measurements are the foundation of any sizing guide, so take them with a soft tape held snug but not tight. Stand straight, breathe normally and keep the tape level around your body. 

Measure your chest at the fullest point, your waist at the narrowest point of your torso, and your hips at the fullest point of your seat. For pants, measure your inseam from the crotch seam down to the ankle bone. 

Write each number down and note the unit you used. Measuring over bulky clothing distorts the result, so take the numbers against light clothing or skin and add layers later. 

- Chest: around the fullest part, tape level under the arms
- Waist: around the narrowest point, usually above the hip bone
- Hips: around the fullest part of the seat
- Inseam: from the crotch seam to the ankle bone
- Sleeve: from the shoulder point to the wrist
- Neck: around the base of the neck for collared items
 

## Reading a size chart and measurement table 

A size chart is a measurement table that lists body dimensions for each size, often in both centimeters and inches. Find the row where your measurements sit and read the size at the start of that row. 

Charts differ in what they list, so check the column headings closely. Some tables show body measurements, while others show garment measurements such as the chest width of the finished jacket. 

Garment measurements include the ease built into the pattern, so a jacket chest width larger than your body chest is normal. Match body numbers to body columns and garment numbers to garment columns. 
| Measurement | What it describes | How to use it | 
| Chest | Body around the fullest point | Match to the body chest column | 
| Waist | Body at the narrowest point | Match to the body waist column | 
| Hip | Body at the fullest seat point | Match to the body hip column | 
| Garment chest | Finished width of the item | Compare with your body chest plus layers | 
| Inseam | Inside leg length | Match to the chart inseam column |  

## What medium size specs actually mean 

Medium size specs describe the body dimensions a maker assigns to its medium, and those numbers vary by brand and by garment type. A medium size is a position on a scale, not a fixed measurement. 

Check the medium size dimensions on the chart for the exact item you want. A medium base layer and a medium winter parka can share a label while fitting very differently. 

If your measurements sit between small and medium, read both rows before deciding. The larger size gives room for layers, while the smaller size sits closer to the body. 

## Choosing a fit for layers and movement 

Fit describes how the garment sits on your body, and outdoor gear often needs room for movement and for clothing underneath. A close fit suits a base layer, while a looser fit suits a shell worn over insulation. 

Think about the activity you plan and the layers you will wear. Raising your arms, bending your knees and sitting down show whether a size leaves enough room. 

Choose the size that matches your larger measurement when two numbers point to different sizes. A tailor can take in extra fabric, but added fabric cannot be created from a garment that is too small. 

## Size conversion between labeling systems 

Size conversion compares labels across regions, such as a European size and a United States size, and the mapping is not exact. Two makers may place the same body measurement under different regional labels. 

Use the measurement table for the item rather than a conversion chart alone. Your body measurements stay the same, while the letters and numbers attached to them shift between systems. 

When a chart offers both regional labels and body measurements, trust the measurements first. The conversion is a convenience, and the numbers are the reliable part. 

## Checking the chart before you order gear 

A final check of the size guide prevents most sizing mistakes before you pay. Compare each of your measurements with the matching column and note where you fall outside a range. 

Read any notes under the chart about relaxed fit, athletic fit or unisex patterns. A unisex chart is built on one body scale, so some wearers size down or up from their usual label. 

Keep your measurement notes with your order details, so a second purchase from the same maker is quicker. Recheck the chart if the item or the maker changes. 

## Fitting gear for a shared park day 

Gear for a park outing is often shared, so sizing should account for more than one person. A picnic blanket, a daypack or a rain shell may pass between adults and children during the day. 

Adjustable straps, drawcords and buckles let one item serve several bodies. Check that the adjustment range covers the people who will use the item, not just the person who carries it first. 

For children, leave room to grow in clothing but keep packs fitted close to the back. A pack that sits too low or too loose shifts weight and tires the wearer. 

## Outdoor gear sizing questions 

### What are medium size specs in outdoor gear? 

Medium size specs are the body measurements a maker lists for its medium size in a size chart. The numbers differ between brands and garment types, so read the medium size dimensions on the chart for the exact item. Your own measurements decide whether that medium row applies to you. 

### How do I use an outdoor gear size chart? 

Use an outdoor gear size chart by taking your body measurements first and then finding the row that matches them. Check whether the columns describe body dimensions or garment dimensions, because the two need different comparisons. Pick the size whose range holds your larger measurement. 

### Do I need a size guide for every brand? 

Yes, a size guide belongs to each brand and often to each item, so the same label can fit differently elsewhere. Compare your measurements with that maker's measurement table rather than carrying over a size from another brand. The chart for the specific item is the one that counts. 

### What should I do if I fall between two sizes? 

Choose the larger size when your measurements fall between two sizes, especially if you plan to wear layers. A looser fit leaves room for movement and for clothing underneath. A close fit suits base layers that sit against the skin. 

### How do I measure for outdoor gear at home? 

Measure for outdoor gear at home with a soft tape held level and snug around your chest, waist and hips. Measure your inseam from the crotch seam to the ankle bone for pants. Write the numbers in one unit and keep them for future orders. 

### What does size conversion mean on a chart? 

Size conversion means matching labels between regional systems, such as European and United States sizes. The mapping is approximate, so use the measurement table as the source. Your body measurements guide the choice more safely than a converted letter.
