How to make beeswax food wraps at home

A plain guide to making beeswax food wraps at home: choose cotton fabric, melt the wax mix, set the wrap, dry it, and care for reusable wraps.

8 min read1 viewsHow to make beeswax food wraps at home
— · 0 votes
Contents
  1. What a beeswax food wrap is
  2. Gather fabric, wax and tools
  3. Cut the fabric to size
  4. Melt the wax mix safely
  5. Apply the coating to the fabric
  6. Try the oven method instead
  7. Cool, dry and store the wraps
  8. Wash and care for reusable wraps
  9. Questions about beeswax food wraps
  10. What is the recipe for beeswax food wraps?
  11. Can I make beeswax food wraps without a double boiler?
  12. Which fabric works for DIY beeswax food wraps?
  13. How do I clean and refresh reusable food wraps?
  14. Is tree resin needed in beeswax wraps?

You make beeswax food wraps at home by coating a piece of clean cotton fabric with a melted mix of beeswax and a little oil, then letting the coating cool and set. The wax soaks into the weave and gives the cloth a tacky surface that molds over a bowl or folds around food. A double boiler on the stove or an oven on a lined tray both do the job.

  • Use thin, clean cotton fabric and cut it to the size of the bowls and snacks you want to cover.
  • A double boiler gives the most control when you melt beeswax with jojoba oil and optional tree resin.
  • Spread the melted mix thinly and evenly so the fabric stays flexible instead of stiff.
  • Hang or lay the finished wrap flat to cool and dry before you fold or store it.
  • Wash reusable wraps in cool water with a little soap and let them air dry.

What a beeswax food wrap is

A beeswax food wrap is a piece of cotton cloth coated with wax so it can fold around food or seal over a dish. The coating makes the fabric slightly tacky, so the wrap holds its shape when you press the edges together.

The wrap works as a reusable cover rather than a sealed container. Warm hands soften the wax enough to mold it, and the cloth lets some air move through, so it suits short storage of bread, cheese, cut produce and bowls of leftovers.

Beeswax food wraps belong with other reusable kitchen items such as cloth liners and fabric snack bags. Keeping a few sizes on hand means you reach for cloth instead of plastic film when you pack a picnic or put food away.

Gather fabric, wax and tools

Cotton fabric is the base of a beeswax food wrap, and a thin weave takes the coating better than a heavy canvas. Wash and dry the fabric first so any sizing or finish is gone and the wax can bond to the fibers.

Beeswax is the main ingredient, and jojoba oil adds flexibility so the cooled wrap bends instead of cracking. Tree resin is an optional addition that makes the coating tackier, though it needs careful melting with the wax.

You also need a double boiler or a heatproof bowl over a pot of water, a brush for spreading, parchment paper and a tray. Scissors, a ruler and pinking shears for neat edges round out the DIY food wraps kit.

Cut the fabric to size

Cut the cotton fabric into squares and rectangles that match the jobs you have in mind. A small square covers a cut avocado or the top of a glass, while a larger rectangle wraps a sandwich or a loaf of bread.

Leave a margin of a few inches beyond the dish rim so the wrap can fold underneath or press against itself. Pinking shears reduce fraying on the cut edges, and a straight cut works if you plan to handle the wrap gently.

Lay each piece flat and trim loose threads before coating. Consistent sizes make the next steps easier and give you a set of reusable wraps that stack neatly in a drawer.

Melt the wax mix safely

Melting beeswax needs gentle, indirect heat because wax can scorch or catch fire over a direct flame. A double boiler, or a heatproof bowl set over simmering water, keeps the temperature steady and the wax away from the burner.

Put the beeswax in the top of the double boiler and let it melt, then stir in the jojoba oil. If you use tree resin, melt it with the wax first and stir until the mixture is smooth and free of lumps.

Keep water out of the melting wax and never leave the pot unattended. Wax that gets too hot can smoke, so pull the pot off the heat if you see smoke and let it cool before you continue.

  • Set a heatproof bowl over a pot of simmering water so the bowl does not touch the water.
  • Melt the beeswax slowly and stir now and then until it turns clear.
  • Stir in jojoba oil, and add melted tree resin if you use it.
  • Keep a lid or tray nearby to rest the brush between pieces.
  • Turn off the heat as soon as the mix is smooth.

Apply the coating to the fabric

The coating step gives the beeswax food wrap its tacky surface, and a thin, even layer matters more than a thick one. Lay a fabric piece on parchment paper on a tray, then brush or pour the melted mix across the cloth.

Work the wax into the weave with the brush so no dry patches remain. Flip the fabric and coat the second side, or place a second sheet of parchment on top and press with a warm iron to spread the wax through the cloth.

Blot any pools of wax with a corner of parchment before the coating sets. A wrap that feels greasy or stiff usually carries too much wax, and you can even it out by pressing it again between fresh parchment.

Try the oven method instead

The oven method coats several beeswax food wraps at once and needs less brushing. Heat the oven to a low setting, lay fabric on a parchment-lined tray, and scatter small pieces of the wax mix over each piece.

Slide the tray into the oven and watch closely until the wax melts and spreads across the cloth. Pull the tray out, tilt it gently so the coating reaches the edges, and add a little more wax where the fabric still looks dry.

The oven method suits a batch of DIY food wraps in matching sizes, while the double boiler gives more control for single pieces. Either way, use a low oven and stay nearby, since wax can smoke when it overheats.

Cool, dry and store the wraps

Cooling and drying set the coating on a beeswax food wrap and decide how well it folds later. Lift each warm wrap by its corners onto a rack or a clean sheet of parchment and let it sit until the wax firms up.

A finished wrap should feel dry to the touch and slightly tacky when you press it. If it still feels wet, give it more time, and if the coating looks streaky, press it again between parchment with a warm iron.

Store reusable wraps flat or rolled loosely in a drawer away from direct heat. Folding a warm wrap can crease the coating, so wait until it is fully cool before you stack the pieces.

Wash and care for reusable wraps

Reusable wraps last longer when you wash them in cool water with a little mild soap and a soft cloth. Hot water can melt the coating, so keep the wash cool and skip the dishwasher.

Rinse the wrap, shake off the excess water and drape it over a rack to air dry. Avoid wringing or scrubbing the cloth, which can pull the wax out of the weave and leave thin spots.

Keep waxed wraps away from raw meat, hot pans and direct sunlight. When a wrap loses its tack or starts to crack, you can refresh it by pressing it between parchment with a warm iron and a little fresh wax mix.

Questions about beeswax food wraps

What is the recipe for beeswax food wraps?

The basic beeswax food wrap recipe combines beeswax with a small amount of jojoba oil, and some makers add tree resin for extra tack. The exact proportions depend on the fabric weight and how firm you want the wrap, so test a small piece first and adjust the mix. Melt the ingredients together gently and spread the blend thinly over clean cotton.

Can I make beeswax food wraps without a double boiler?

You can make beeswax food wraps without a double boiler by using a heatproof bowl over a pot of simmering water or by coating the fabric in a low oven. Both setups give indirect, gentle heat, which keeps the wax from scorching. Never melt wax over a direct flame or in a microwave you cannot watch.

Which fabric works for DIY beeswax food wraps?

Thin, tightly woven cotton works well for DIY beeswax food wraps because the wax soaks into the fibers and the cloth stays flexible. Wash and dry the fabric before coating to remove any finish that blocks the wax. Prints are fine as long as the dye is set and the cloth is clean.

How do I clean and refresh reusable food wraps?

Clean reusable food wraps with cool water and mild soap, then air dry them flat or draped over a rack. Avoid hot water, the dishwasher and scrubbing, since these strip the wax. Refresh a tired wrap by pressing it between parchment with a warm iron and a little fresh wax mix.

Is tree resin needed in beeswax wraps?

Tree resin is optional in beeswax wraps and adds tackiness that helps the cloth cling to dishes. Without it, a mix of beeswax and jojoba oil still makes a workable wrap that folds and holds. Resin needs careful melting with the wax, so follow safe melting steps if you include it.

Read next

Latest articles