How to descale a kettle with citric acid

A plain guide to descaling a kettle with citric acid: how much powder to use, how long to soak, boiling the solution and rinsing the kettle clean.

2 min read2 viewsHow to descale a kettle with citric acid
— · 0 votes
Contents
  1. Mixing the citric acid dose
  2. Boiling and soaking the solution
  3. Rinsing the kettle afterward
  4. Questions about citric acid descaling
  5. How do you descale a kettle with citric acid?
  6. How much citric acid powder goes into a kettle?
  7. How long should the citric acid solution soak?
  8. Does the kettle need rinsing after descaling?

You can descale a kettle with citric acid by filling it with water, adding citric acid powder, heating the solution and leaving it to soak. The acid dissolves the limescale crust that builds up on the heating element and inside the walls. This page explains the dosage per liter, the boiling step, the soaking time and the rinsing that finishes the job.

Mixing the citric acid dose

A workable starting dose is one to two tablespoons of citric acid powder for each liter of water the kettle holds. Citric acid powder dissolves fastest in warm water, so add it to water that is already heated rather than to cold water. Fill the kettle only to a level above the scale line and below the maximum mark. A heavily scaled kettle needs the higher end of that range.

Boiling and soaking the solution

Heat the citric acid solution until it boils, then switch the kettle off before it can boil dry. The boiling solution loosens the limescale, and the soak does the rest of the work. Let the kettle stand with the solution inside until the crust softens and lifts from the surface. Soaking time depends on how thick the scale is, so check the element before you pour the solution away.

Rinsing the kettle afterward

Pour out the used solution and rinse the kettle with clean water more than once. Rinsing removes acid residue and the flakes of loosened limescale that settle at the bottom. Wipe the inside with a soft cloth and never scrape the element with metal. Boil fresh water and discard it before you make a drink in the kettle again.

Questions about citric acid descaling

How do you descale a kettle with citric acid?

Descaling a kettle with citric acid means filling it with water and citric acid powder, then heating and soaking the solution. The acid softens the limescale so it can be rinsed away. Finish by rinsing the kettle with clean water and boiling fresh water once.

How much citric acid powder goes into a kettle?

The dosage per liter is roughly one to two tablespoons of citric acid powder for each liter of water. A kettle with a thick scale layer takes the larger amount. Measure the water your kettle holds so the dose matches its size.

How long should the citric acid solution soak?

The soaking time depends on the thickness of the limescale, so there is no fixed figure. Leave the solution in the kettle until the crust looks soft and starts to lift. Check the element now and then, and reheat the solution if it cools before the scale loosens.

Does the kettle need rinsing after descaling?

Yes, rinsing the kettle is a necessary last step after descaling with citric acid. Rinse with clean water more than once to clear the acid and the loosened scale. Boil fresh water and throw it away before the kettle is used for drinking water.

Latest articles