Fire building basics: how to build a campfire outdoors
A plain guide to fire building basics: gather tinder, kindling and fuel wood, pick a fire lay, light a campfire safely and put it out completely.
Contents
Fire building basics cover the whole job of a campfire, from choosing a safe spot to putting the flames out cold. You gather tinder, kindling and fuel wood in rising sizes, arrange them in a fire lay such as a teepee or log cabin, and light the tinder with matches, a lighter, a ferro rod or another ignition source. The page explains how to build a campfire safely in a park or other outdoor setting, including matchless methods and the steps that end a fire properly.
Sorting tinder, kindling and fuel wood
Tinder and kindling basics start with three sizes of material, each doing a different job in the fire. Tinder is the fine, dry stuff that catches a spark, such as shredded bark, dry grass or charred cloth. Kindling is small twigs and split sticks that carry the flame upward, and fuel wood is the larger wood that keeps the campfire going. Keep each pile dry and within reach before you strike a match, and add sizes in order as the flame grows.
Choosing a fire lay for the weather
A fire lay is the shape you stack the wood in, and the shape changes how the campfire burns. A teepee fire leans kindling into a cone over the tinder so the flame climbs quickly. A log cabin lay stacks fuel wood in a square around the tinder and suits a steadier burn for cooking. Pick the lay that matches the wind and the wood you have, and leave gaps so air can reach the flame.
Lighting and extinguishing the campfire
Ignition starts with a spark or flame placed at the base of the tinder, where air flows in. Matches or a lighter work on a calm day, while a ferro rod, flint and steel or a bow drill set give matchless ignition when you need it. Fire extinguishing matters as much as lighting, so keep water and a shovel ready before you begin. Drown the campfire, stir the ashes and feel for heat, and repeat until the ground is cold.
Campfire lighting and safety questions
How do you light a campfire?
You light a campfire by placing a flame or spark at the base of a small tinder bundle under your fire lay. Let the tinder catch and add kindling in small pieces before any fuel wood goes on. Blowing gently at the base feeds air to the flame without scattering ash. Check the park fire rules first, because some places allow only raised fire rings or stoves.
How can you start a fire without matches?
Fire starting methods without matches rely on a spark or friction instead of a flame. A ferro rod throws hot sparks onto dry tinder, and flint and steel works on the same principle with a sharp strike. A bow drill or hand drill spins wood to make a hot coal that you tip into tinder. These fire starting skills take practice, so learn them before you depend on them outdoors.
How do you build a campfire safely?
Building a safe campfire begins with a clear spot away from overhanging branches, dry grass and tents. Use an existing fire ring where the park provides one, and clear a wide circle of bare ground around it. Keep water and a shovel within reach, and never leave the fire burning unattended. Check park fire rules and any burn bans before you light anything.
How do you put a campfire out completely?
You put a campfire out by drowning it with water, stirring the ashes and checking for heat with the back of your hand. Repeat the water and stirring until nothing feels warm and no smoke rises. Cold ashes can go home with you or into the bin the park provides. Never walk away from a fire that is still warm, and never bury hot coals in soil.